UNISORB® Epoxy Anchor Bolts Encapsulated
with Stud Assembly
This anchor bolt
system provides a superior method of heavy duty machine
anchoring using a high strength epoxy adhesive to retain
a threaded rod and other materials such as rebar in
concrete or other masonry material. The system
consists of a glass capsule containing the proper
proportion of base resin, hardener and aggregate for the
anchor, an appropriate length stud with washer and nut
and a drive unit to allow the stud to be inserted into a
standard hammer drill.
To install the anchor a clearance hole is prepared and a
capsule is inserted. The stud is driven into the
hole with a standard rotary hammer drill using the drive
unit. This action breaks the glass capsule and
mixes the pre-measured components. At room
temperature the anchor nuts may be torqued down within
approximately 30 minutes.
Extensive testing
and field trials have proven the UNISORB Capsule Anchor
Systems are among the most dependable anchor systems
available, far superior to expansion type anchoring
systems, and stronger than the concrete itself.
Specifications
|
|
Anchor
Size |
Capsule
Number
|
Drill
Diameter |
Hole
Depth |
Anchor Number
& Length |
† Ultimate
Tensile Load |
Ultimate
Shear Load |
|
3/8” |
C-38 |
7/16” |
3-1/2" |
S-38 x 5 1/8” |
7,820 lbs. |
6,480 lbs. |
|
1/2" |
C-12 |
9/16” |
4-1/4"” |
S-12 x 6-1/2" |
13,435 lbs. |
11,120 lbs. |
|
5/8” |
C-58 |
11/16” |
5” |
S-58 x 7-5/8” |
20,585 lbs. |
17,650 lbs. |
|
3/4" |
C34 |
7/8” |
6 5/8” |
S-34 x 9-1/2" |
27,400 lbs. |
27,385 lbs. |
|
7/8” |
C78 |
1” |
7” |
S-78 x 10-1/4" |
35,040 lbs. |
36,065 lbs. |
|
1” |
C-100 |
1-1/4" |
8-1/4" |
S-100 x 12” |
47,800 lbs. |
53,135 lbs. |
|
1-1/4" |
C-114 |
1 ˝” |
10-1/4” |
S-114 x 15” |
70,100 lbs. |
68,000 lbs. |
†
Ultimate tensile load data
Test
results using 4,000 psi concrete are given as a guide
only. It is recommended that tests to simulate actual
conditions be carried out to determine the suitability
of Capsule Anchors for particular applications.
To order
specify capsule, stud and drive (if required).
|
