 The
Stock Oiler has been developed to accommodate any type
or thickness of material. Its revolutionary roll
assembly pivots to accommodate material movement and
crown, camber or unstraightened stock.
Any kind of lubricant is evenly
distributed to the absorbent felt roller by a predrilled
PVC inner tube that rides in an oil bath.
Oil flow to each roller is
individually controlled by metering valves which are
installed on a reservoir tank that is equipped with an
oil level gauge.
Adjustable tension springs help to
apply the right oil film by supplying enough pressure to
squeeze off any excess which is then recycled to the
unit.
Mounting the compact Stock Oiler
between the press feed and tool is easily done by
attaching a magnet to the steel base, or drilling two
holes. Two wing nuts allow for quick pass line
height adjustment to suit different tools.
The use of the Stock Oiler increases
die life and eliminates the "coffee-can" mess which
makes your operation safer and more efficient.
The Stock Oiler is available in 5
stock with sizes from 4 to 24 inches and will
accommodate thicknesses to 0.187 inches. |
