|
AutoCell™ calibration-standard load cells
with built-in instrumentation measure dynamic
tonnage applied by metal forming presses. The
AutoCell load cell is a self-contained, strain
gage based load cell that is calibrated on
equipment traceable to the National Bureau Of
Standards. Standard digital AutoCells are
available in 2,000 pounds, 10,000 pounds, or 50,
100, 250, 500, 750, 1000 and 2000 ton
capacities.
Press tonnage calibrations
and press checks are now quick and easy. It is
no longer necessary to connect load cells to a
portable instrument. The AutoCell load cell is
one compact, easy-to-use unit without extensive
setup, additional instruments or cables. It is
easy for anyone to place AutoCells into a press
and get immediate tonnage readings for press
calibration and testing.
 Features
include:
-
Digital tonnage
display for accuracy
-
Automatic update
on each stroke
-
Peak forming
tonnage is measured
-
No controls to
adjust
-
One touch Start
button
-
Automatic
shut-off after 5 minute idle
-
Automatic zero
adjustment
-
Built-in
circuits assure correct balance
-
Has a 50%
overload factor
-
Use 2 AutoCells
for c-frames
-
Use 4 AutoCells
for straight-sides
-
High quality
4340 steel construction
See AutoCell Specifications here.
|
